More Stupidly Wonderful Tone Controls!
A couple of new designs for output tone controls that maintain a consistent volume as the tone level is adjusted.
Read about it in the Lab Notebook.
[41] Stupidly Wonderful Tone Control 2
Date: August 31st, 2007 | Comments : none | Categories: DIY.[40] AMZ Jfet Buffer-Splitter
Date: August 26th, 2007 | Comments : [8] | Categories: DIY.
I was looking back at the jfet buffer presented earlier in this blog, and noted that it would be easy to add some extra transistors to the buffer to turn it into a multiple output signal splitter.
Also, the veroboard layout is easily extended to accomodate the extra components and I have included that in the article.
You can find it in the AMZ Lab Notebook.
[39] Digital vs. Analog
Date: August 13th, 2007 | Comments : [1] | Categories: Uncategorized.Can you hear the difference between digital and analog mixing systems? Digidesign, the owner of the ProTools computer recording software, wants to know and has posted some clips to allow the curious to test digital vs. analog. Check it out:
[38] AMZ Dual Tone Control
Date: August 10th, 2007 | Comments : none | Categories: Uncategorized.
Separate Bass and Treble Controls for the BMP
(more…)
[37] AMZ Mosfet Booster
Date: August 9th, 2007 | Comments : [5] | Categories: DIY.
[36] Epiphone Valve Jr.
Date: August 2nd, 2007 | Comments : [20] | Categories: amps.
Search
View a Random Post
from the archive.
-
You are currently browsing the AMZ-FX Guitar Effects Blog weblog archives for August, 2007.
Comments
- Reid: First off, thank you for all the information you publish here. I...
- admin: If you want to look at the Electra pcb support page, it is here:...
- admin: “An analog signal is one that is continuous in both...
- François: I replaced R4 with a trimmer and increaced R3 to 3.3k for my...
- François: I built a discrete op amp using the Urei design (using 5...
Email List
Archives
Categories
Blogroll
Author
Jack Orman has been involved in FX design and construction since the mid-1970s.
Meta
