[28] Pedal power booster

Date: July 2nd, 2007 | Comments : [2] | Categories: power.

Voltage doublers
From the work-in-process file comes this photo of a few circuit boards.

They are for an inline voltage doubler that will convert 9v to 18v for powering your effects pedals. The circuits on the two boards are actually identical but I ran out of the miniature capacitors used on the bottom board and had to go with the slightly larger blue ones shown on the board above.

More info when I get them mounted in an enclosure.

 

2 Responses to “Pedal power booster”

[34] Guitar Fact Says: 8:49 pm, July 11th, 2007

That is certainly very interesting. I took an electronics class for two years, and never really got into making anything for my guitar.

I gave up electronics for programming though, but part of me still wishes I could do what you are doing!

Best of luck with it.


[35] admin Says: 9:23 pm, July 11th, 2007

Thanks for the kind comments.

You have a nice blog as well. I will spend some time later reading your posts there.

regards, Jack




 

AMZ Home Page

Guitar FX PCBs

PRIVACY POLICY