Dragonfly (Andy) has posted another excellent pedal painting tutorial, this time on a faux granite finish. Check it out:
[203] Faux Granite Pedal Finish
Date: September 16th, 2008 | Comments : none | Categories: DIY.Comments are closed.
Search
View a Random Post
from the archive.
Comments
- admin: If you want to look at the Electra pcb support page, it is here:...
- admin: “An analog signal is one that is continuous in both...
- François: I replaced R4 with a trimmer and increaced R3 to 3.3k for my...
- François: I built a discrete op amp using the Urei design (using 5...
- admin: Yes, it only took a couple of minutes to heat up the iron and...
Email List
Archives
Categories
Blogroll
Author
Jack Orman has been involved in FX design and construction since the mid-1970s.
Meta
