[1654] Mini vs Mos Distortion

Date: October 17th, 2014 | Comments : [1] | Categories: DIY.

Minibooster-Mosfet distortion graph

I measured the distortion components of a mini-booster and mosfet boost for comparison.

Argggh! The graph above is not accurate. I was connected to the wrong signal generator and was getting results that were too noisy and distorted! The boosters do much better than the previous graphs indicated.

Check out the updated article in the Lab Notebook.


One Response to “Mini vs Mos Distortion”

[283553] Chris Says: 12:56 am, October 24th, 2014

I’ve got the MOSFET booster installed in a guitar with active pickups. I recently added another battery in series with the existing one for 18v operation, however the board draws power from the same spot, and is now misbiased. What do I need to change to fix this?


AMZ Home Page

Guitar FX PCBs