[637] Pedalboard Power Supply

Date: May 2nd, 2010 | Comments : [1] | Categories: DIY.

HP power adapter

This is an old power supply that I salvaged from an HP inkjet that has gone to the tech graveyard. It puts out 18v at 2.23 amps and is perfect for use as the power supply for a pedalboard when coupled with the AMZ Power Supply PCB. I would limit current by using a 1A or 1.5A fuse.

Power PCB prototype

I have added some items to the builder page for the power pcb so if you have bought one, you may want to check back on the page occasionally for the latest updates.

 

One Response to “Pedalboard Power Supply”

[3034] Chris Says: 2:17 am, August 9th, 2012

Wow, so HP printers ARE good for something after all!




 

AMZ Home Page

Guitar FX PCBs

PRIVACY POLICY