[2190] Tone Report Weekly Issue 159

Date: January 11th, 2017 | Comments : [1] | Categories: DIY.

Tone Report Issue 159

Issue No. 159 of Tone Report magazine has an article on how to DIY my mosfet booster. The author was very complimentary of both me and the circuit, which I greatly appreciate. If you don’t like working with stripboard, as shown in the article, there are pc boards and completely assembled modules available on my catalog page so you can build your own mosfet boost.

The pcb and modules have a refined version of the circuit that improves performance slightly.


One Response to “Tone Report Weekly Issue 159”

[774134] Kerry Maxwell Says: 11:44 am, January 12th, 2017

The MosFet Booster remains an essential part of my board, and probably my favorite DIY project I’ve done. I use it primarily as a buffer before a volume pedal, but with a large control knob, it’s very easy to adjust on the fly as a boost. I made my own layout, and had boards fabbed, so it’s also a nicely personalized touch to my setup.


AMZ Home Page

Guitar FX PCBs